高输出功率小功率检验台仪（耐弧光检验台仪）-（求算机把控好）

High voltage low current tester (arc resistance tester) - (computer control)

护肤商品编码称：耐电弧试验机

Product name: electric arc resistance tester

车辆规格型号：NDH-A

Product model: NDH - A

充分满足规范：GB/T 1411-2002《物质隔绝涂料耐高压得很低的电流量电弧焊接释放电能的检验》（一样IEC  61621-1997）及ASTM D495等条件的标准要求制定生产制造的，并满足IEC 149、UL 746A等做实验的时候工艺

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

注意适用人群的范围及功用：

本经过多次实验发现机是明确应该广泛用于发电机、电商元件和水取暖器电商元件等职业的低压电工用泡沫氟塑料、树酯胶和隔绝电阻层漆等隔绝电阻层的原素材的耐焊弧机械安全性能认定，主广泛用于固态垃圾隔绝电阻层的原素材如：泡沫氟塑料、pet薄膜、树酯、白云母、陶瓷厂家、玻璃纸、隔绝电阻层油、隔绝电阻层漆、瓦楞纸等物料的耐焊弧机械安全性能各种测试；

本试验装置机由计算的机把握加载，可不可以显现之前工作工作报告设计英文方式及工作报告设计英文时间段，工作报告设计英文终结后并另存之前工作工作报告设计英文数据源，并可网页打印.标准规定实验计划书计划书。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 该设备为上下左右立体式的结构，底端为实操体系，上方为校正箱。

2 本类产品适用*新智力把握科技，采用选择方式（IEC或ASTM）可自主实施做实验的时候，并在网上上呈现试验检测操作过程和最终。

3 **使用性能很好，抗干预意识强，考试计算精度就越高。

二：Functional features：

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 电弧放电通断用时不确定度：不低于 ±10ms

2 调压器储存量：2kVA

3 电机额定功率做实验的时候电流值：12.5kV

4 检测电阻的精密度：±3%

5 工作电流的控制误差：±10%  功率检测的高精度：1.5%

6 电极片对制样心理压力：（0.5±0.05）N

7 参比电极建材：钨棒

8 金属电极时间：（6.35±0.1）mm（IEC）

               （6.0±0.1）mm（ASTM）

9 用到区域环境温暖：（23±2）℃

10 选择的环境相对湿度：（50±5）%

11 外接电源：220V±5%  50Hz  10A

12 试验台    方案：   行业标准/美标/10 mA 重复/20 mA 持续/30 mA不间断/40 mA间隔

13 测试系统程序如下所示：

Three main technical parameters：

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

Four configuration：

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 商品应用：

NDH-A    耐弧光校正仪-微机管控

NDH-B    耐电弧焊接实验设计仪-触摸式屏操作

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询！